-
Bearings
Bearings
-
Housings/housing Units
Housings/housing Units
-
Linear Technology
Linear Technology
-
V-Belts
V-Belts
-
Seals
Seals
FAG
Axial Deep Groove Ball B. FAG 52202
- Technical data
- Inner diameter
- 10 mm
- Outer diameter
- 32 mm
- Width
- 22 mm
- Material
- Standard bearing steel
- Cage
- Sheet steel cage
- Running accuracy
- Tolerance class P0/PN2 / ABEC 1
- Product range
- Axial deep groove ball bearing
- Operating direction
- Double direction bearing
- Angular adjustment
- Non-angle adjustable
- Temperature range
- -30 to +150 °C
- Weight
- 0,085 kg
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 1,79 € | 34,00 € |
| 35 | 3,58 € | 32,21 € |
Axial Deep Groove Ball B. FAG 52202
The FAG 52202 double-acting axial deep-groove ball bearing accommodates axial forces in both directions and has compact dimensions of 10 × 32 × 22 mm.
The 52202 axial deep-groove ball bearing from FAG Rolling Bearings is designed as a double-acting rolling bearing. It is used to guide shafts in both axial directions and absorbs thrust forces acting on both sides. Manufactured from standard rolling-bearing steel (100Cr6), this bearing is characterised by its dimensional stability. The integrated sheet steel cage guides the rolling elements evenly along their raceways and keeps frictional resistance low. This provides a functional component for axial bearing arrangements in mechanical engineering.
In which installation scenarios does the 52202 axial deep groove ball bearing absorb forces?
This axial deep-groove ball bearing is used where purely axial loads act alternately from both directions on the rotating shaft. Due to the bidirectional load distribution, the component provides longitudinal guidance on both sides without the need for additional counter-bearing support. Typical applications include bearing arrangements with alternating axial thrusts in general fixture and machinery construction. Due to its design, the bearing must not absorb any radial forces. For combined loads, it is recommended to supplement the arrangement with a separate radial bearing on the same shaft.
What are the mounting requirements for the 52202 axial deep groove ball bearing?
When fitting the 52202 axial deep-groove ball bearing, the precise alignment of the mating parts is crucial. This design is not angle-adjustable and is intended for installation without shims. The contact surfaces on the shaft and housing must therefore be machined to be flat and perpendicular to the axis of rotation to prevent the bearing from running on an edge. The permissible operating temperature range is from -30 to +150 degrees. Thanks to its tolerance class P0/PN or ABEC 1, the bearing is compatible with standardised industrial mountings.
What makes the 52202 axial deep-groove ball bearing stand out?
This double-acting axial bearing, with a 10 mm bore, 32 mm outer diameter and 22 mm height, absorbs axial forces from two directions. It guides the shaft axially in both directions, whilst radial forces must be absorbed by separate bearings.
What loads can the 52202 bearing withstand?
The component absorbs only axial forces, but in both directions along the shaft axis. The bearing must not be subjected to radial loads, as these can cause the rolling elements to tilt in the raceways and lead to increased wear.
What is the permissible temperature range for the 52202 axial deep-groove ball bearing?
The specified operating temperature range is from -30 to +150 degrees. In addition to the 100Cr6 rolling bearing steel and the sheet steel cage, the actual operating limit is determined primarily by the thermal stability of the grease or oil selected by the user.
Can angular misalignment be compensated for using the 52202 axial deep-groove ball bearing?
No, this version is not angle-adjustable. The bearing has flat housing washers and is designed without spherical washers. All contact surfaces on the shaft and housing must be machined at right angles to prevent uneven loads.
What is the tolerance class of this bearing?
The bearing complies with tolerance class P0/PN, which is comparable to ABEC 1. This standard accuracy class is suitable for common industrial applications in mechanical engineering and fixture manufacturing, and allows for installation in standardised fits.
What material is the bearing cage made of?
The component is fitted with a sheet steel cage. This type of cage spaces the balls evenly, ensures a stable rolling element spacing and is resistant to standard mineral oil-based lubricants within the permissible temperature range.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/
10013063