Axial Deep Groove Ball B. FAG 52308

The 52308 axial deep-groove ball bearing from FAG Wälzlager absorbs axial forces and is designed for shafts with an outer diameter of 78 mm and a width of 49 mm.

The 52308 axial deep-groove ball bearing is a rolling bearing made from standard bearing steel, specifically designed to accommodate axial loads. The assembly has an outer diameter of 78 mm and a width of 49 mm. Thanks to its multi-part design, the shaft ring, housing ring and ball ring can be fitted independently of one another. For maintenance engineers and industrial buyers, this bearing from FAG offers a dimensionally accurate solution for assemblies subject to axial forces acting on one or both sides.

What is the 52308 axial deep groove ball bearing suitable for?

This axial bearing absorbs axial loads and guides shaft components in the longitudinal direction. The design is intended for assemblies in which no radial forces act on the bearing location. Typical applications include bearing arrangements subject to purely axial loads in general mechanical engineering. Maintenance engineers prefer to use the open design in protected housings, where external lubrication with grease or oil continuously supplies the raceways.

What advantages does the sheet steel cage offer during operation?

The integrated sheet steel cage guides the rolling elements in the raceways and withstands mechanical loads. In combination with standard rolling bearing steel, the bearing unit covers a temperature range from –30 to +150 °C. When selecting a bearing, please note that axial deep-groove ball bearings are sensitive to misalignment. Perpendicular and flat contact surfaces on the housing and shaft help to prevent edge loading and distribute the load evenly across the rolling elements.