FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 2,93 € | 55,64 € |
| 30 | 5,85 € | 52,72 € |
The FAG 52208 double-acting axial deep-groove ball bearing accommodates axial forces in both directions whilst maintaining compact dimensions of 30 × 68 × 36 mm.
The 52208 axial deep-groove ball bearing is a specialised axial bearing designed for industrial applications. Manufactured by FAG, it is made from standard rolling-element bearing steel (100Cr6). It has a bore of 30 mm, an outside diameter of 68 mm and a height of 36 mm. A sheet steel cage guides the rolling elements between the rings. The bearing is suitable for a temperature range of -30 to +150 degrees.
This bearing provides axial support for shafts when operating forces occur alternately from both axial directions. This design does not accommodate radial forces. Typical applications include industrial bearing arrangements with axial loads on both sides in general mechanical engineering. A prerequisite for trouble-free operation is that the housing components are in a precisely perpendicular position relative to the shaft, as this model is not designed to be angle-adjustable.
As a double-acting variant, the design guides a shaft axially in both directions within the housing. It is manufactured to tolerance class P0 or ABEC 1. The product scope comprises only the axial deep-groove ball bearing without shims. The flat bearing discs require plane-parallel mounting surfaces so that any axial forces are transmitted evenly across the entire pitch circle of the balls.
A key feature is its ability to accommodate axial loads from both sides. The bearing has a bore of 30 mm, an outer diameter of 68 mm and a width of 36 mm. Fitted with a sheet steel cage, it is suitable for operating temperatures between -30 and +150 degrees.
Axial deep-groove ball bearings are designed exclusively to support axial forces. They must not be subjected to any significant radial loads. For combined loads, it is recommended to use them in conjunction with a separate radial bearing, which takes up the radial forces on the shaft.
Manufacturing is carried out to the ‘Normal’ tolerance class (P0/PN or ABEC 1). This classification meets the standard requirements for dimensional accuracy and concentricity in general mechanical and plant engineering at industrial speeds.
No, this model is not angle-adjustable. The bearing washers have flat contact surfaces and are sensitive to misalignment between the shaft and the housing. The mounting surfaces must therefore be machined at right angles to the axis of rotation to prevent the bearing from running on its edge.
The housing washers, shaft washer and rolling elements are made from standard roller bearing steel (100Cr6). This material offers high dimensional stability and wear resistance within the specified operating temperature range of -30 to +150 degrees.
The scope of supply comprises the Axial deep-groove ball bearing only, without any additional shims. The housing washers rest directly against the machine housing, which is why the mating surfaces must be flat and rigid.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/