Axial Deep Groove Ball B. SKF 53306

The SKF 53306 axial deep groove ball bearing precisely accommodates unilateral axial forces with dimensions of 30 × 60 × 22.6 mm and flexibly compensates for misalignment.

The 53306 axial deep groove ball bearing is a separable rolling bearing designed to support purely axial forces in one direction. With a bore diameter of 30 mm, an outside diameter of 60 mm and a height of 22.6 mm, this thrust bearing supports shafts against axial thrust forces. Manufactured from standard 100Cr6 rolling-element bearing steel and fitted with a sheet steel cage, this SKF bearing is designed for operating temperatures ranging from -30 to +150 degrees.

What loads can the 53306 axial deep groove ball bearing withstand?

The rolling bearing is used for the axial fixation of shaft guides on which only thrust forces act in a single direction. As axial deep groove ball bearings, by their very nature, must not bear any radial loads, designers typically combine this bearing with separate radial bearings on the same shaft. Manufactured to tolerance class P0/PN or ABEC 1, this model meets standard requirements in general mechanical engineering, gearboxes and spindle bearings.

When is the angular-contact version appropriate?

The spherical housing washer of this bearing serves to compensate for misalignment between the shaft and the housing. To utilise this angular adjustability during operation, a suitable, separately available washer with a hollow spherical mating surface is required. The scope of supply includes the single-acting bearing without a shim. During assembly, fit the shaft washer with a tight fit onto the shaft, whilst the housing washer is centred within the component.