FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 17,81 € | 338,45 € |
| 5 | 35,62 € | 320,64 € |
The FAG 52220 axial deep-groove ball bearing accommodates axial forces in both directions with a bore of 85 mm and an outside diameter of 150 mm.
The 52220 axial deep-groove ball bearing guides shafts precisely in both axial directions and accommodates purely longitudinal forces only. Manufactured from standard rolling-bearing steel (100Cr6), this design maintains its dimensional stability within a temperature range of -30 to +150 degrees Celsius. The design complies with the standard tolerance class P0/PN or ABEC 1. A robust sheet steel cage guides the rolling elements of both ball rings evenly along the raceways.
This double-sided thrust ball bearing is suitable for designs in which alternating thrust forces occur in both directions. As the design is not angularly adjustable, it requires precisely perpendicular contact surfaces on the shaft and housing. The assembly reliably absorbs purely axial loads; however, it must not bear any radial forces. Typical applications include industrial bearing arrangements with thrust loads acting from both sides, which require precise shaft guidance without misalignment.
The double-sided action is based on a centre disc, two ball rings and two outer housing discs. The scope of supply includes the 52220 axial deep groove ball bearing without shims. As there are no spherical compensating washers, misalignment or shaft deflection must not occur during operation. When designing the assembly, ensure that the mating surfaces are sufficiently flat and that lubrication is carried out carefully, as the open component must be protected from dirt and moisture whilst in operation.
The component absorbs axial forces in both directions. The assembly consists of rolling elements, sheet steel cages and flat raceway discs made from standard 100Cr6 rolling bearing steel, and guides shafts axially on both sides.
The bore is 85 mm, the outer diameter is 150 mm and the overall width is 67 mm. These dimensions determine the required installation space within the housing and on the shaft.
No, this bearing is not angle-adjustable. The contact surfaces must be perpendicular to the axis of rotation, as any misalignment will cause the balls to run on their edges and significantly increase wear on the balls.
No, axial deep-groove ball bearings are designed exclusively for axial loads. Radial forces must be supported by separate radial bearings, such as cylindrical roller bearings or deep-groove ball bearings, mounted on the same shaft.
The roller bearing is designed for operating temperatures ranging from -30 to +150 degrees Celsius. The actual operating limit is determined by the temperature resistance of the lubricant used.
The manufacturing process complies with the standard tolerance class P0/PN, which is comparable to ABEC 1. This level of precision meets the requirements of standard mechanical and plant engineering in terms of dimensional and running surface tolerances.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/