7209  BECBP Angular Contact Ball B. by SKF
7209  BECBP Angular Contact Ball B. by SKF

SKF

Angular Contact Ball B. SKF 7209 BECBP

Technical data
 
Inner diameter
45 mm
Outer diameter
85 mm
Width
19 mm
Ball rows
Single row bearing
Seal
None, open bearing
Clearance
Normal radial clearance
Running accuracy
Dimensional accuracy P6, Running accuracy P5
Outer ring
Without flange/groove
Arrangement
Bearing pair with a low axial clearance in O- and X-arrangement
Version
Explorer
Weight
0,416 kg
Scale quantity Your discount Unit price
15 2,91 € 55,20 €
30 5,82 € 52,29 €
58,11 €
exkl. MwSt, zzgl. Versandkosten

68 ready to ship

Angular Contact Ball B. SKF 7209 BECBP
In Stock

Angular Contact Ball B. SKF 7209 BECBP

The SKF 7209 BECBP angular contact ball bearing provides precise shaft guidance under combined radial and axial loads, with dimensions of 45x85x19 mm.

The SKF 7209 BECBP single-row angular contact ball bearing accommodates combined loads consisting of simultaneously acting radial and axial forces. Manufactured from standard rolling-element bearing steel (100Cr6), this open bearing has a bore of 45 mm, an outside diameter of 85 mm and a width of 19 mm. The SKF Explorer bearing design combines dimensional accuracy to P6 with finer running accuracy to P5. A polyamide cage guides the rolling elements within a temperature range of -20 to +120 degrees.

What is the 7209 BECBP angular contact ball bearing with a 40-degree contact angle suitable for?

This angular contact ball bearing absorbs axial forces in one direction whilst simultaneously supporting radial loads. The nominal contact angle of 40 degrees gives the component a high axial load-carrying capacity. The design is typically suitable for shaft mountings where unidirectional axial thrusts need to be supported in a dimensionally stable manner.

What advantages does the universal design offer for bearing pairs?

The BECBP design is prepared for installation in sets. When mounted as a bearing pair in an O or X arrangement, a defined, small amount of axial clearance is automatically established. This facilitates the adjustment of the bearing arrangement without the need for additional calibration using shims. As this is an open bearing without a flange on the outer ring, the external sealing and lubrication can be specifically tailored to the respective installation environment.

What are the dimensions of the 7209 BECBP angular contact ball bearing?

With a bore of 45 mm, an outside diameter of 85 mm and a width of 19 mm, the bearing complies with standardised dimensions. The outer ring is designed without a groove or flange, which facilitates neat installation in through-holes in the housing.

What does a print angle of 40 degrees mean?

The contact angle describes the angle at which the line connecting the points of contact between the balls and the raceways is inclined relative to the radial plane. An angle of 40 degrees, indicated by the letter B in the designation, ensures a high axial load-carrying capacity in one direction whilst simultaneously withstanding radial loads.

Why does this bearing not have an integrated seal?

As an open roller bearing, this design is intended for installation locations where lubrication and sealing are provided by the surrounding housing. This allows lubrication via centralised oil circuits or application-specific greases. The absence of sealing lips also reduces friction losses during continuous operation.

What are the characteristics of the integrated polyamide cage?

The polyamide cage, identifiable by the suffix ‘P’, is characterised by its low weight and good damping properties. It guides the rolling elements quietly and is suitable for operating temperatures ranging from -20 to +120 degrees under normal industrial conditions.

How does the bearing clearance behave when bearings are fitted in pairs?

The single bearing has a standard radial clearance. When two bearings of this type are combined in an O or X configuration, the matched ring widths result in a defined, low axial clearance without the need for any additional adjustment. This ensures play-free and precise guidance of the supported shaft.

What do the tolerance classes P6 and P5 mean for this bearing?

The specification indicates a higher level of precision than the standard. The dimensional accuracy complies with tolerance class P6, whilst the running accuracy meets the even finer P5 class. As a result, the bearing runs with particularly low impact, which minimises vibrations on the shaft.

SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership

10017742
Product added to compare.
Product added to wishlist

Reset Password

New Account Register