Angular Contact Ball B. SKF 7200 BEP

The single-row angular contact ball bearing 7200 BEP, measuring 10x30x9 mm, accommodates combined radial and single-direction axial loads in mechanical engineering.

The SKF 7200 BEP angular contact ball bearing is a single-row radial rolling bearing made from standard bearing steel (100Cr6) with a bore of 10 mm, an outer diameter of 30 mm and a width of 9 mm. Designed with angular raceways, this bearing is suitable for shaft mountings where, in addition to radial forces, axial loads act in one direction. It is manufactured to tolerance class P0 or ABEC 1 and meets the standard requirements for general mechanical engineering.

In which mounting configurations does the 7200 BEP angular contact ball bearing accommodate axial forces?

This single-row angular contact ball bearing is primarily used where axial forces act on the rotating shaft from a defined direction. Thanks to the angled raceways, the bearing transfers axial loads directly via the outer ring. To accommodate alternating or bidirectional axial forces, the component is usually mounted in contact with a second angular contact ball bearing. This arrangement provides stable support for the shaft in both axial directions.

What is the function of the 40-degree contact angle and the polyamide cage?

The 40-degree contact angle determines the force transmission through the rolling elements and gives the component a high axial load-carrying capacity in one direction. The integrated polyamide cage guides the rolling elements with low friction and promotes even load distribution whilst maintaining a low weight. As an open design without sealing washers, the bearing is designed for protected housings and a targeted supply of lubricant within a temperature range of -20 to +120 degrees.