FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 11,32 € | 215,05 € |
| 5 | 22,63 € | 203,74 € |
The FAG 3313 -B-TVH angular contact ball bearing accommodates high radial loads as well as axial loads on both sides, whilst having compact dimensions of 65 × 140 × 58.7 mm.
This double-row angular contact ball bearing 3313 -B-TVH, made from standard roller bearing steel (100Cr6), functions in the same way as two single-row angular contact ball bearings in an O-arrangement, but requires less axial installation space than two individual bearings. With an inner diameter of 65 mm, an outer diameter of 140 mm and a width of 58.7 mm, this rolling bearing is suitable for demanding bearing applications. The contact angle of 40 degrees enables it to accommodate high axial forces in both directions whilst maintaining stable radial guidance.
Design engineers use double-row angular contact ball bearings when shaft supports need to accommodate both radial forces and alternating axial forces simultaneously. Thanks to the 40-degree contact angle, the bearing effectively counteracts tilting moments. Typical applications can be found in general mechanical engineering for shaft supports subjected to combined loads. The open design allows for use in enclosed housings, where a lubrication circuit using oil or grease supplies the rolling elements.
The suffix ‘TVH’ denotes a polyamide cage that guides the rows of balls. The material dampens running noise and keeps the coefficient of friction low. The bearing is designed for operating temperatures ranging from –20 to +120 degrees. With standard radial clearance and manufactured to tolerance class P0/PN (ABEC 1) without a groove in the outer ring, the component fits into standardised bearing seats. As no integrated sealing washers are fitted, protection against dirt particles is determined by the external sealing of the housing design.
The bearing has a bore of 65 mm, an outer diameter of 140 mm and a width of 58.7 mm. It has a cylindrical inner ring and a smooth outer ring without a flange or groove.
The abbreviation TVH stands for a polyamide cage. This material is characterised by its low weight, good sliding properties and quiet operation. The cage guides the balls and retains its shape within the specified temperature range.
Due to its double-row design and a contact angle of 40 degrees, the component can withstand combined loads. It supports both radial and axial forces in both directions. Furthermore, the internal arrangement of the two rows of balls enables it to withstand tilting moments.
The permissible operating range is between -20 and +120 degrees. This range is primarily limited by the polyamide cage material and the standard 100Cr6 rolling bearing steel used. A lubricant suitable for these temperatures must be used during operation.
As an open-type bearing, it has no integrated seals or cover plates. During installation, it is filled with grease or connected to a central oil lubrication system. To prevent contamination and loss of lubricant, the surrounding housing structure provides the seal.
The angular contact ball bearing is manufactured with standard radial clearance. Its dimensional and running accuracy complies with tolerance class P0 or PN, which corresponds to ABEC 1 classification. It is therefore suitable for applications with standard requirements for fit and running accuracy.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/